Here is a growing list of parts, materials and small tasks to do. It is constantly being updated with new things added.
PARTS
1- Cowl Assy (upper and lower, welded together and e-coated. Dynacorn)
2-Upper splashguard (20.0)- Got
3-Valance (45.0)- Got
4-Tail light lenses (26.0)- Got
5-Pony fender trim (25.0)- Got
6-Q-panel window handcranks- Got
7-Windshield and backlight rubber seals- Got
8-Carpet set
9-Mats
10-Sound deadener/Dynamat
11-Fuel sending unit
12- Fender Apron extensions (go in the forward part of the cowl, on each end)-got
MATERIALS
1-Mustang Seam Sealer (weld seam sealer)
2-Bodywork & Paint:
4-Interior dye (Ivy Gold)
5-Eastwood Internal Frame Coating (Zinc-phosphate to coat rusty surfaces that can't be reached for scraping. Clean and prep first with a rust remover. Get the 360 degree telescopic spray nozzle. Use it in the front and rear rail frames [chassis], the cowl, interior of the B-Pillars. etc.)
6- POR-15 or KBS Coating (optional products). Includes the POR-15, the MEtal Ready and the Marine Clean. KBS is a "paint over rust" coating that costs $125.0 a gallon.
7-Glass mounting Sealer. 3M #8509. Do not use between the rubber seal and glass. Only between the rubber seal and metal frame.
8-Sandpaper:
SMALL TASKS
1-Paint the grille in semi-gloss black
2-Re-touch engine block with Ford Blue
3-Replace driver's side upper controller arm ball joint
4-Replace leaf springs
5-Replace all bushings (lower control arm, strut rods, front endlink, tie rod boots, etc)
6-Recondition Exhaust manifolds (clean/paint)
7-Replace Fuel-sending unit
PARTS
1- Cowl Assy (upper and lower, welded together and e-coated. Dynacorn)
2-Upper splashguard (20.0)- Got
3-Valance (45.0)- Got
4-Tail light lenses (26.0)- Got
5-Pony fender trim (25.0)- Got
6-Q-panel window handcranks- Got
7-Windshield and backlight rubber seals- Got
8-Carpet set
9-Mats
10-Sound deadener/Dynamat
11-Fuel sending unit
12- Fender Apron extensions (go in the forward part of the cowl, on each end)-got
MATERIALS
1-Mustang Seam Sealer (weld seam sealer)
2-Bodywork & Paint:
- PPG Deltron 2000 Lime Gold Basecoat (2-Stage) (Urethane)
- 2 or 3 Lime Gold (enamel) rattlecans
- B/C Normal Temp Reducer (needed for the Deltron 2000)
- 2K Primer Surfacer
- 2K Undercoat Hardener
- 4.2 Polyurethane Clear
- Medium Polyurethane Hardener
- Rage Gold Body Filler (Gallon)
- Spreaders & Mixing Cup
- Red filler (putty) for covering nicks
- Dry Guide Coat Kit
4-Interior dye (Ivy Gold)
5-Eastwood Internal Frame Coating (Zinc-phosphate to coat rusty surfaces that can't be reached for scraping. Clean and prep first with a rust remover. Get the 360 degree telescopic spray nozzle. Use it in the front and rear rail frames [chassis], the cowl, interior of the B-Pillars. etc.)
6- POR-15 or KBS Coating (optional products). Includes the POR-15, the MEtal Ready and the Marine Clean. KBS is a "paint over rust" coating that costs $125.0 a gallon.
7-Glass mounting Sealer. 3M #8509. Do not use between the rubber seal and glass. Only between the rubber seal and metal frame.
8-Sandpaper:
- 40-grit. For stripping
- 80-120. Bodyfiller blocksanding
- 180. 1st primer block sanding
- 220. 2nd primer block sanding
- 320/400/600. For 1st/2nd/3rd wet sanding. Also use 320 for back-sanding
9- 3M 8115 Panel Bond Adhesive (first use 3M general purpose adhesive cleaner or 3M Prep Solvent 70)
10- 3M Seam sealer (Urethane Ultra Pro or MSP) for bonding and sealing panels. Black.
11-3m Spray Adhesive 8090 for vinyl tops and headliners.
10- 3M Seam sealer (Urethane Ultra Pro or MSP) for bonding and sealing panels. Black.
11-3m Spray Adhesive 8090 for vinyl tops and headliners.
SMALL TASKS
1-Paint the grille in semi-gloss black
2-Re-touch engine block with Ford Blue
3-Replace driver's side upper controller arm ball joint
4-Replace leaf springs
5-Replace all bushings (lower control arm, strut rods, front endlink, tie rod boots, etc)
6-Recondition Exhaust manifolds (clean/paint)
7-Replace Fuel-sending unit
No comments:
Post a Comment